Please note:

To provide the best possible viewing experience please use Internet Explorer 8.0 or higher, Firefox, Chrome, or Safari.

Distributor Log in Sign up

Having problems logging in?
Please contact us at (800) 342-6329 ext. 203

Call 216.341.2022

Resources | Food Processing

Back to product list Resources-title-arrow

General Questions

Pizza Capper Operating Manual

Find the Pizza Capper operating and capping instructions, as well as cleaning info here.



How to replace cheese cutter wire

  1. Wire has one large loop and one small loop on the ends. Pass the wire end with the small loop through the slot in the base, then over stud.
  2. Then turn arm to reveal slotted head and thread wire through the slot to guide wire
  3. Then place the large loop over the anchor screw on the flip lever on the handle.
  4. While flipping the lever into place, pressure must be exerted on the cutter arm to allow the wire to be tightened securely.
  5. Force lever over slowly to tension wire. Check that wire stays centered in the slot on the flip lever.